05-14-2008 07:19 AM - edited 03-18-2019 08:56 PM
Hi All!
I would like to know if and how it is possible to implement Intercom with more than two phones...
We would like to use Intercom for general announcements through all phones if possible.
I saw such a cool feature on UC520.
Tnx in advance
Gerhard
Solved! Go to Solution.
05-15-2008 04:06 AM
Hi Gerhard,
Sadly, the Intercom in CCM 6.x is still a one to one releationship and cannot perform the funtionality you are looking for.
Here are two highly regarded 3rd party products that can both page through IP Phones.
CDW-Berbee Informacast
http://www.berbee.com/public/berbeesoftware/InformaCast.aspx
IPCelerate
http://www.ipcelerate.com/assets/docs/IPcelerate_ER.pdf
Hope this helps!
Rob
05-14-2008 07:53 AM
what you're looking for is paging
Configuring Paging
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/admin/configuration/guide/cmepage.html
HTH
javalenc
if this helps, please rate
05-14-2008 10:31 PM
But I cannot configure paging on CUCM 6.0.1.
Is there another solution for CUCM 6.0.1?
TNX in advance!
Gerhard
05-15-2008 04:06 AM
Hi Gerhard,
Sadly, the Intercom in CCM 6.x is still a one to one releationship and cannot perform the funtionality you are looking for.
Here are two highly regarded 3rd party products that can both page through IP Phones.
CDW-Berbee Informacast
http://www.berbee.com/public/berbeesoftware/InformaCast.aspx
IPCelerate
http://www.ipcelerate.com/assets/docs/IPcelerate_ER.pdf
Hope this helps!
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: