Alex Pfeil Fri, 05/16/2008 - 03:35
User Badges:

Here is an example of how I use it. This is from a 1242, however the output is the same on a 1231. My info is bleeped out with #'s


snmp-server community #########

snmp-server location ##########

snmp-server contact A########

snmp-server chassis-id ##############

snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart

snmp-server enable traps disassociate

snmp-server enable traps deauthenticate

snmp-server enable traps authenticate-fail

snmp-server enable traps rogue-ap

snmp-server enable traps syslog

snmp-server enable traps aaa_server


In the running config it shows up right below the access-list.


Hope this is of some assistance.


Thanks,


Alex Pfeil

Actions

This Discussion

 

 

Trending Topics - Security & Network