Sort of complicated designing task I got. Please have a look at following scenario of mine.
Problem: How to configure 2 leased line on Cisco 515E PIX
Description: In my environment I have
-1 Cisco 1841 router with WIC2-T card.
-1 Cisco 515E PIX
- 1 leased line is already configured and used for VPN access and for internet
Proposed Scenario Need to configure additional leased line to divert HTTP/Internet traffic on new line. Existing VPN will remain on existing link.
Conclusion after Googling:
- I need 6.3.3 version os in my PIX
- Policy based NATing will be used
Doubts After upgrading os will I be able to use Policy based NAT feature for sure? Any1 tried this before? Or shall I purchase additional ethernet card for PIX?
I have configured Public WAN IP on router as usual. And configured fa 0/1 int and connected cable to PIX's 3rd port. Havent configured PIX's 3rd ethernet which is reserved for DMZ. But we are not using DMZ.
Any hints, clues on this ?
Would be glad if you can give an example of Policy based NATing.
Goal is to configure new link in such a way that all HTTP traffic will go through this new line while existing VPN will remain as it is.