Recommendations for CRC alarm thresholds

Unanswered Question
May 14th, 2008
User Badges:

Have been trying to find some recommendation for generation of Minor, Major and Critical alarms based on CRC errors on a serial port -- locIfInCRC.


Does anyone have some info regarding this? Thanks.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
tstanik Tue, 05/20/2008 - 09:08
User Badges:
  • Bronze, 100 points or more

Users can configure the CRC threshold per interface.

Router(config)#int f0

Router(config-if)#crc threshold

"no crc threshold " will set the threshold value back to the default one.


Users can enable the trigger action:

Router(config)#int f0

Router(config-if)#crc trigger

"no crc trigger" will disable the trigger action.


Users can configure the soak time for excessive CRC error detection, the valid value is from 3 minutes to 10 minutes.

Router(config)#int f0

Router(config-if)#crc delay

"no crc delay " will set the soak value back to the default one.



Actions

This Discussion