Hiii, yes the trunk is on and there is no password configured and other switch is in server name.its only one switch in client mode which is not updated by server others are getting updated..any thoughts

Try stripping out the vtp domain name and re inputting it.

already tried this resulting the config revision no. to 0.bt still its not updating

Hi

Try making a new vlan on the server and deleting it to generate a couple of updates, and see if that makes any difference.

Martin

can we see the show vtp status on both switches?

sure for ur convinience i am posting the output of show vtp staus command for server n client switches.

for server switch-

VTP Version : 2

Configuration Revision : 16

Maximum VLANs supported locally : 1005

Number of existing VLANs : 16

VTP Operating Mode : Server

VTP Domain Name : CORE

VTP Pruning Mode : Disabled

VTP V2 Mode : Disabled

VTP Traps Generation : Disabled

MD5 digest : 0xA2 0x49 0x7F 0xEB 0x52 0xF5 0x4F 0xE0

Configuration last modified by 10.101.43.1 at 3-2-93 21:31:25

for client switch-

sh vtp status

VTP Version : 2

Configuration Revision : 1

Maximum VLANs supported locally : 128

Number of existing VLANs : 15

VTP Operating Mode : Client

VTP Domain Name : CORE

VTP Pruning Mode : Disabled

VTP V2 Mode : Disabled

VTP Traps Generation : Disabled

MD5 digest : 0xFA 0x3F 0x7B 0xB9 0x05 0x94 0xD8 0xBB

Configuration last modified by 10.101.43.5 at 4-13-93 02:22:38

This looks ok. have you run a debug to chk vtp synchronisation?

can u plz suggest the appropriate commands to do this...

not sure, but try this...

debug sw-vlan vtp