05-15-2008 06:47 AM - edited 03-03-2019 09:58 PM
Hi,
When i power up the router, it shows me the message below. May I know why?
loadprog: bad file magic number: 0x0
boot: cannot load "flash:"
System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
Copyright (c) 2003 by cisco Systems, Inc.
C2600 platform with 131072 Kbytes of main memory
rommon 1 >
05-15-2008 07:09 AM
is the IOS present in flash. check with command:
>dir flash:
if its present then issue this command:
>boot flash: filename
This should work if the iOs is there in flash.
05-15-2008 07:11 AM
That means the ios or flash problem. Mostly the IOS.
Try to give the dir flash command and find if there is any ios available in the flash.
Then boot it from rommon mode.
If this does not work then upgrade a new ios.
Let us know if any help required.
05-15-2008 07:36 AM
try to copy the IOS with tftpdnld from rommon (you'll erase the flash after). Then try to download a news IOS image, and upload again on your router.
HTH
Regards
Andrea
05-16-2008 04:22 AM
Hi,
Can give me the link to download the latest IOS image for cisco 2600?
05-16-2008 04:31 AM
You have to specify which kind of software you are intrested in: Ip-base, enterprise etc.
Use the Software planner to select you best choice.
05-16-2008 04:33 AM
Hi,
an alternative: Cisco Feature Navigator
to download an IOS release software is required a contract open.
HTH
Andrea
05-16-2008 05:27 AM
we do not have the maintenance contract, is there any alternative way to download?
05-16-2008 05:49 AM
Nope, sorry.
Andrea
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide