05-15-2008 06:59 AM - edited 03-05-2019 11:00 PM
Hello,
Please your help with the following thing.
I try without success to form Device Center configure crendential:
WS-C2960-24TT-L 12.2(25)FX, 12.2(25)SEE1 and 12.2(25)SEE2
WS-C2960G-24TC-L 12.2(25)SEE2
and
WS-C3560E-24TD 12.2(35)SE2
On having validated with âCheck device crendential and view credential verification report, is failed, and errors
indicates "Device Not Supported"
My CiscoWorks is:
LMS 2.5 and Resource Manager Essentials 4.0.3
Your you know as I can solve this?
Regards and thanks
Joan
05-20-2008 02:58 AM
Hi Joan,
If I can recall correctl, many of the 2960 models were aded in RME 4.0.4 and 4.0.5.
Check if you can upgrade RME to one of these versions.
-> Sushil
05-20-2008 12:06 PM
Hi Sushil,
I cannot check upgrade from "Check for Updates" in CW, Probably it is for my profile CCO. I can consegir the last version of REM for the LMS 2.5, of another form?
Thanks!
Joan
06-05-2008 06:33 AM
Hi Sushil,
Thank you for your help!!
The upgrade was a success and this I solve the problem for the equipments:
WS-C2960-24TT-L 12.2(25)FX, 12.2(25)SEE1 and 12.2(25)SEE2
WS-C2960G-24TC-L 12.2(25)SEE2
But not in the device
WS-C3560E-24TD 12.2(35)SE2, This is even âDevice Not Supportedâ and âDevice Type Unknownâ (â¦But it is visible from Cisco View)
Now we have
LMS 2.5
RME 4.0.4
Please your help in the following step!
Regards and Thanks
Joan
06-05-2008 07:05 AM
Hi Joan,
Well its really nice to hear that the issue has been resolved now.
As far as the support of WS-C3560E-24TD goes, it is supported in RME 4.0.4.
I really have no idea why its giving you this error.
I hope that you have already upgraded all other components as well to the latest in LMS 2.5.
The OID for the switch is 1.3.6.1.4.1.9.1.793
-> Sushil
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: