Anonymous (not verified) Wed, 05/21/2008 - 06:00
User Badges:

Review configuration in MPE

Administration/system configuration/call configuration/h.323 configuration

2. Review outdial setting in users profiles

3. Review configuration in administration/system configuration/dial

configuration check "outdials" setting

4. at cli run command "activity" place a test call check for errors.

5. Check CCM configuration for calling search space (should be same as all

ip phones)

6. Pull infocapture to check cptrace as needed.


ricardorojas123 Fri, 05/23/2008 - 05:43
User Badges:

1. SystemConfiguration/Call Configuration/H.323 Configuration.

h.323 enable: yes

E.164 address: 8000

H.323 ID: MPE

Local H.323 port: 1720

Use Gatekeeper: No

H.323 gateway 1: IP Address of the CallManager6.0


2. User Configuration/User Profile Management

Outdial Meeting Defaults

Can call out of meetings: Yes

Ask for profile password: No


3. System Configuration/Call Configuration/Dial Configuration

Outdial: H.323


That is my specific configuration.

The IP Phone can call to meeting place express and the IVR call? The problem is a call from the Meeting Place to Cisco IP Phone.



Actions

This Discussion