ONS 15454 MRC 2.5G4

Answered Question
May 15th, 2008

Hi All,

We are trying to install the optical multirate card (MRC 2.5Gig) on ONS 15454 and found the card comming up on standby state instead of active. The version running on the sonet box is 8.5.0 ...The MRC card port 1 is installed with the OC3 SFP's but cable not attached.

Any help would be appreciated .

Regards

Anantha Subramanian Natarajan

I have this problem too.
0 votes
Correct Answer by Rene Frank about 8 years 6 months ago

Hi, this is normal. Just go on and enable a SFP, called pluggable port module (PPM). After the first SFP is enabled, the state of the MRC card will change to working.

Cheers

Rene

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Rene Frank Thu, 05/15/2008 - 22:04

Hi, this is normal. Just go on and enable a SFP, called pluggable port module (PPM). After the first SFP is enabled, the state of the MRC card will change to working.

Cheers

Rene

anasubra_2 Fri, 05/16/2008 - 03:37

Hi Rene,

Thank you very much ...We were able to do that .

Regards

Anantha Subramanian Natarajan

Actions

This Discussion