Poblem in activating the bri interface

Unanswered Question
May 15th, 2008
User Badges:

hello,


i have configured the bri interface earlier, and it worked fine.Today, when i want to do the same thing, the card is down


ISDN BRI0/1/1 interface

dsl 3, interface ISDN Switchtype = basic-net3

Layer 1 Status:

DEACTIVATED

Layer 2 Status:

TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED

Layer 3 Status:

0 Active Layer 3 Call(s)

Active dsl 3 CCBs = 0

The Free Channel Mask: 0x80000003

Total Allocated ISDN CCBs = 0


i have supposed that the problem comes from Telco, but i have plugged a phone behind the Telco modem, the call arrives.


thanks for help



Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Paolo Bevilacqua Thu, 05/15/2008 - 13:27
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

May be this line doesn't have static tei so you need to remove that command. In that case, best is to use "isdn tei-negotiation preserve".

Actions

This Discussion