05-16-2008 01:56 AM - edited 03-05-2019 11:01 PM
Hello.
We have Cisco 2851 (c2800nm-adventerprisek9_ivs-mz.124-15.T4).
Periodically the nat rule:
ip nat inside source static ip1 ip2
missing from config.
Why this happens?
05-19-2008 12:46 AM
Can anybody help me?
05-19-2008 12:54 AM
does it happen after a reboot ?
05-19-2008 03:31 AM
No, uptime on my router more than 1 week.
If i replace my rule on
ip nat inside source static tcp ip1 80 ip2 80
It also missing after some hour's of working (frequently this happens in night hour's).
05-19-2008 03:34 AM
Hi
R u using the same IP for multiple translation entries..?
Thanks
Mahmood
05-19-2008 03:45 AM
This my config:
ip nat translation tcp-timeout 300
ip nat inside source route-map MAP1 interface GigabitEthernet0/0.123 overload
ip nat inside source static 192.168.0.1 91.196.XX.XX
ip nat inside source static 172.16.0.1 91.196.YY.YY
the latest rule missing
05-19-2008 03:50 AM
Hi
can u remove this line n try.
ip nat translation tcp-timeout 300
Thanks
Mahmood
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide