UC520 with VIC2-2BRI-NT/TE

Unanswered Question
May 17th, 2008
User Badges:

I have a UC520 with Cisco IOS Software, UC500 Software (UC500-ADVIPSERVICESK9-M), Version 12.4(11)XW7, RELEASE SOFTWARE (fc2).

I have installed a VIC2-2BRI-NT/TE interface Cards in UC520, now i have 4 ISDN Basic Rate interfaces.

i want to use one of the 4 interfaces as Internal ISDN for a FAX-Server on MS Windows SBS 2003, (with a Eicon BRI Card).

how cann i do it ? with CCA 1.6 is not passible or i dont how.

Thanks for your help


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
paolo bevilacqua Sat, 05/17/2008 - 11:30
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member


first of all you might not even need the eicon card. CME/CUe can receive/send fax, convert to email, even on a per-user basis.

This said, you cannot use the CCA for anything more than basic configuration. This one would require you prepare crossed BRI cables, then configure like:


Hope this helps, please rate post if it does!

1janwalli Sun, 05/18/2008 - 00:59
User Badges:

Thanks for your very fast Answer,

How can i configure the UC520 for recive/send Fax ? do you have a link for a Document.

How work the receive/send fax on CME/CUE ?

i have multiple ISDN-Nr (MSN) from ISP and i want to use one of the number for fax receiving.

how cann i send a fax from Win-PC-Client ?

Is a FAX-Server oder Network-Modem Emulation on UC520 ?

Best Regards und Thanks for your help


paolo bevilacqua Sun, 05/18/2008 - 01:24
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member


do you have a qualified partner helping you with the uc500 ? That is very necessary most most advanced configurations. You may loose a lot of time and get frustrated when you have no experience in these things. For fax relay, see:


More information is in cue and cme system administrator guides.

As a recogniotn to tose providing answers, please rate useful posts with the scrollbox below!


This Discussion