05-17-2008 04:31 PM - edited 03-15-2019 10:43 AM
Hi,
i have a cisco 7204vxr router (c7200-is-mz.123-6f.bin)and on one of the networks (wich is a nat) there are sip clients connected to a sip server on another network. What is happening is that the router is acting as a ALG/SBC changing the sip/spd information inside the packets.Since i have another equipment doing SBC function, i would like to know how to disble it on the 7204vxr.I have searched a lot, but could not find and answer.
Thanks for your help,
André Santos
05-22-2008 11:48 AM
The following URLs will provide you the information:
http://www.cisco.com/en/US/docs/ios/12_4t/ip_addr/configuration/guide/htnatsbc.html
http://www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r3.4/sbc/configuration/guide/sbc34shd.html
http://www.cisco.com/en/US/prod/collateral/routers/ps341/data_sheet_c78_339749.html
05-23-2008 02:44 AM
Thaks for your help, but the solution to my problem was as simples as
no ip nat service sip udp port 5060
Anyway,
thanks for your help
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: