NPE G1/G2 Gig. Ethernet Options

Unanswered Question
May 18th, 2008
User Badges:
  • Bronze, 100 points or more

Is there is any options to have NPE G1/G2 with an additional UTP gig ethernet . As I know the only option for Gig Ethernet is PA-GE which is fibre . Is there is any other router comes with 4 Gig Ethernet ? . In my design a router with 4 UTP gig ethernet

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Loading.
paolo bevilacqua Sun, 05/18/2008 - 05:20
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

PA GE has a GBIT connetor to which you connect a module of your choice including copper.


Note if you're looking for wire-speed routing across all 4 Gbit ports, your best choice would be a layer-3 switch, because the 7200 is incapable of that.


Hope this helps, please rate post if it does!

Haris P Sun, 05/18/2008 - 05:35
User Badges:
  • Bronze, 100 points or more

Hi ,


What you meant by " PA GE has a GBIT connetor to which you connect a module of your choice including copper " ? Is it possible to connect copper on PA-GE , As I know PA-GE has only fibre GBIC ( either GBIC-LX , GBIC-LH or GBIC-ZX ) . Can you tell me how you can connect a module of copper on PA-GE ??


Have a look in this link


http://www.cisco.com/en/US/docs/interfaces_modules/port_adapters/install_upgrade/ethernet/pa-ge_gigabit_ethernet_install_config/2696cabl.html


Regards,

Haris


Actions

This Discussion