05-19-2008 01:32 AM
Regards to all, I have a problem at the moment of forming the connection of my supplier of Internet. I have proved everything possible but all the results are negative.
The parameters of configuration are:
VPI:8 VCI:32 IP: 80.80.80.80/24 Encap: MAC Encapsulated Routing Someone can help me with this problem.
Pardon for my English :(
05-19-2008 02:10 AM
bridge irb
bridge 1 route ip
int atm0
no ip address
int atm0.1 point-to-point
no ip address
bridge-group 1
pvc 8/32
int bvi1
ip address ..
ip nat outside
hope this helps, please rate post if it does!
05-19-2008 02:32 AM
Hello p.bevilacqua!, thank you for helping myself but I continue without coming to Internet.
I put a sh run:
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname yourname
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
!
crypto pki trustpoint TP-self-signed-1935357841
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1935357841
revocation-check none
rsakeypair TP-self-signed-1935357841
!
!
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool sdm-pool
import all
network 10.10.10.0 255.255.255.248
default-router 10.10.10.1
lease 0 2
!
!
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
no ip domain lookup
ip domain name yourdomain.com
!
!
!
!
!
archive
log config
hidekeys
!
!
!
bridge irb
!
!
interface ATM0
no ip address
shutdown
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
pvc 8/32
!
bridge-group 1
bridge-group 1 spanning-disabled
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 10.10.10.1 255.255.255.248
ip tcp adjust-mss 1452
!
interface BVI1
ip address X.X.X.X 255.255.255.0
ip nat outside
ip virtual-reassembly
!
ip forward-protocol nd
!
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
access-list 23 permit 10.10.10.0 0.0.0.7
no cdp run
!
!
!
control-plane
!
bridge 1 route ip
!
line con 0
login local
no modem enable
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
login local
transport input telnet ssh
!
scheduler max-task-time 5000
end
That can be failing?
05-19-2008 02:49 AM
Hola,
You are missing:
- "bridge-group 1" under atm0.1
- default route like 0.0.0.0 0.0.0.0 x.x.x.x
- ip nat inside source list XX interface bvi1 overload
- and ACL for the above
Also check that you're connect in first place with "show dsl interface".
05-19-2008 03:09 AM
I also meet very lost
I have put this configuration but it continues without working.
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname yourname
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
!
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool sdm-pool
import all
network 10.10.10.0 255.255.255.248
default-router 10.10.10.1
lease 0 2
!
!
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
no ip domain lookup
ip domain name yourdomain.com
!
!
!
!
!
archive
log config
hidekeys
!
!
!
bridge irb
!
!
interface ATM0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
description $ES_WAN$
pvc 8/32
encapsulation aal5snap
!
bridge-group 1
bridge-group 1 spanning-disabled
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 10.10.10.1 255.255.255.248
ip tcp adjust-mss 1452
!
interface BVI1
ip address X.129.224.68 255.255.255.0
ip nat outside
ip virtual-reassembly
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 ATM0
!
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
access-list 23 permit 10.10.10.0 0.0.0.7
no cdp run
!
!
!
control-plane
!
bridge 1 route ip
!
line con 0
login local
no modem enable
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
login local
transport input telnet ssh
!
scheduler max-task-time 5000
end
05-19-2008 03:12 AM
Hi, you're entering the wrong commands. Please read my message and enter the command correctly.
05-19-2008 03:32 AM
I am sorry, but not as put the commands that you have indicated me, you can help do it to me please
05-19-2008 03:49 AM
Most important is ip route 0.0.0.0 0.0.0.0 must have IP of default GW and not an interface.
05-19-2008 04:12 AM
Hello, i configured:
ip route 0.0.0.0 0.0.0.0 ATM0.1 KO
ip route 0.0.0.0 0.0.0.0 BVI1 KO
On having done one sh ip inter brief:
Interface IP-Address OK? Method Status Protocol
FastEthernet0 unassigned YES unset up up
FastEthernet1 unassigned YES unset up down
FastEthernet2 unassigned YES unset up down
FastEthernet3 unassigned YES unset up down
ATM0 unassigned YES manual up up
ATM0.1 unassigned YES manual up up
Vlan1 10.10.10.1 YES NVRAM up up
BVI1 X.129.224.68 YES manual down down
NVI0 unassigned NO unset up up
05-19-2008 12:29 PM
Hi, what I'm trying to tell you, remove the above static routes and use instead the IP address of deault gateway as communicated by the ISP.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide