IOS/C6500: Difference between IOS Feature Sets

Answered Question
May 19th, 2008

Dear all,

I'm going to install two C6509-E. Right now I'm trying to find out what are the differences between the feature sets:

- IP SERVICES SSH LAN ONLY

- IP SERVICES SSH

We need IP Services for EIGRP and QoS, furthermore i need to configure HSRP for some VLANs/IP-subnets.

Software Advisor says, that the features are common. So which feature set and image should i install??

Thanks

Matthias

I have this problem too.
0 votes
Correct Answer by Richard Burts about 8 years 8 months ago

Matthias

The services that you mention are common in both of these feature sets. The difference is that the IP SERVICES SSH LAN ONLY does not provide WAN services (which makes its memory requirement less). If you need WAN services do not use this image. If all you need are LAN services then this image is fine.

HTH

Rick

Correct Answer by Jon Marshall about 8 years 8 months ago

Matthias

The LAN only does not have support for the flexwan and some of the WAN modules/cards. I can't find a list of them at the moment but if you don't have any you should be fine with either version.

Jon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Jon Marshall Mon, 05/19/2008 - 04:05

Matthias

The LAN only does not have support for the flexwan and some of the WAN modules/cards. I can't find a list of them at the moment but if you don't have any you should be fine with either version.

Jon

Correct Answer
Richard Burts Mon, 05/19/2008 - 04:08

Matthias

The services that you mention are common in both of these feature sets. The difference is that the IP SERVICES SSH LAN ONLY does not provide WAN services (which makes its memory requirement less). If you need WAN services do not use this image. If all you need are LAN services then this image is fine.

HTH

Rick

Actions

This Discussion