HI [Pls RATE if HELPS]

Use the WAN KILLER Tool to TEST the Circuit.

Using the Tool you can PUMP the Traffic to until your requested Bandwidth. Observe the Input & Output rate on the WAN Interface.

Hope I am Informative.

Pls Rate if HELPS

Best Regards,

Guru Prasad R

Hi there,

Thanks for the info but appreciate if you can give more details. How can i confirm the speed with the following sample:

48482432 packets input, 1326954085 bytes, 0 no buffer

21114144 packets output, 2743938039 bytes, 0 underruns

Many thanks.

HI, [Pls Rate if HELPS]

Pleaes execute the below command and paste:

Router#sh int Gi3/3 | i rate

Queueing strategy: fifo

30 second input rate 15582000 bits/sec, 9299 packets/sec

30 second output rate 58686000 bits/sec, 12625 packets/sec

Refer the "INPUT & OUTPUT" Rate value in the output above and they calculated in bits/sec.

Hope I am Informative.

Pls Rate if HELPS

Best Regards,

Guru Prasad R