05-19-2008 07:26 AM - edited 03-20-2019 05:53 AM
I have the Cisco Meeting Place Express 2.0, and I would like schedule video conferencing. I Schedule a new meeting and in the MoreOption I don't have options available to Video Meeting, the options if the MoreOptions are:
More options
Meeting password
Billing code
Language English (US)
Who can attend
Entry announcement
Exit announcement
Web meeting room
How I can enable this option?
05-19-2008 09:17 AM
Hi -
Have you purchased video ports for your MPE 2.0? These are licensed separately from voice or web ports. Here is the release notes for MPE 2.0 - http://www.cisco.com/en/US/docs/voice_ip_comm/meetingplace_express/2_0/english/release/notes/b_rn20.html#wp245504. You should review the Video Conferencing Endpoint Requirements section. requirements as well as make sure your CallManager supports video (versions 4.1 and greater).
Ginger
05-19-2008 10:47 AM
Hi, this is my License Summary in my Cisco Meeting Place Version 2:
I have this licences:
Name : videoconf
Enable: 6
Installed: 0
And have enable videocall and videoconference in my Cisco IP phones, and this works succesfull.
CCM: 5.0, 7970+VtAdvantage.
05-19-2008 12:49 PM
What I need ?
05-19-2008 01:17 PM
Hi -
I believe with CallManager 5.0, you can use H.323 or SIP to integrate video conferencing end points (like Tandberg or Polycom). We've not done this yet. Here is the sample Cisco documentation:
I would also check with your conferencing system's vendor because they may have their own integration document for CallManager 5.0.
Ginger
05-20-2008 01:04 AM
Hi,
I think you didn't configure the user to allow setup a video meeting.
You have to edit the user profile and configure the user can also setup a video meeting. Default is attend only.
05-20-2008 05:58 AM
hermanvoet, you're right !
Now the user can reserve video resource !
05-20-2008 06:30 AM
hermanvoet, could you help me whit this problem:
The configuration of the Exchange dont work,the configuration is as follows:
E-Mail Service Administration/Exchange Server Configuration
Hostname: the ip address of the exchange server
Languaje: en_GB
SSL enabled: false
Cisco Unified MeetingPlace Express Mailbox Account
Windows domain: the name of windows domain
USername: username of the account of meeting place express
Password: the password of the account meeting place express
E-mail: the mailbox of the meeting place express
Mailbox maintenance interval (days) * : 7
Mailbox maintenance cutover (days) * : 14
I test this configuration in the button test and this message appear:
"Unknown language error. Check that the Exchange Server language is correct."
What I can I do to resolve this problem?
The accounts of the mailbox and the windows works fine!
05-21-2008 12:32 PM
Nice to hear it works fine now ;)
About your Exchange configuration; I guess you should use en_US instead of en_GB...
About your video session... have you tried it and did it work integraded to MPE? Mine is coming up as VT advantage session in case of integrated in MPE. It could be a license problem (my setup is running with the default license which are default installed). In my opinion it should work fine but I can't say for sure.
Could you try to setup a video session for me and see what's happen or do you know the problem? Bot phones 1 DP, 1 CSS, 1 Region/location etc. configuration of the phones is the same. Only the number is different.
Thanks,
05-23-2008 05:25 AM
Hi, I change the languaje to en_US and the problem continue.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: