2801 - phones not automatically creating DN's

Answered Question
May 19th, 2008
User Badges:

On my old UC520 my phones used to create an ephone and ephone dn when I plugged them in.


On my 2801 nothing of the sort happens, ive got to manually create them. Any ideas if this functionality is just unique to the UC520?

Correct Answer by mattcalderon about 9 years 1 week ago

you need to have auto registration enabled under telephony service.


http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmesystm.html



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3.7 (3 ratings)
Loading.
Jaime Valencia Mon, 05/19/2008 - 08:24
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

no, it's not unique to UC520, the SW of the UC520 is a CME 4.2 so all the functionalities are in a regular CME


HTH


javalenc


if this helps, please rate

Rob Huffman Mon, 05/19/2008 - 09:41
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Huw,


Maybe you could try CME "Extension Assigner". Have a look;


Creating Phone Configurations Using Extension Assigner


http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmexasgn.html#wp1011070



Hope this helps!

Rob


Actions

This Discussion