05-19-2008 07:52 AM - edited 03-15-2019 10:44 AM
On my old UC520 my phones used to create an ephone and ephone dn when I plugged them in.
On my 2801 nothing of the sort happens, ive got to manually create them. Any ideas if this functionality is just unique to the UC520?
Solved! Go to Solution.
05-19-2008 08:51 AM
you need to have auto registration enabled under telephony service.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmesystm.html
05-19-2008 08:24 AM
no, it's not unique to UC520, the SW of the UC520 is a CME 4.2 so all the functionalities are in a regular CME
HTH
javalenc
if this helps, please rate
05-19-2008 08:25 AM
cheers mate, any idea how I turn it on?
05-19-2008 08:51 AM
you need to have auto registration enabled under telephony service.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmesystm.html
05-19-2008 09:41 AM
Hi Huw,
Maybe you could try CME "Extension Assigner". Have a look;
Creating Phone Configurations Using Extension Assigner
Hope this helps!
Rob
05-20-2008 07:20 AM
cheers guys
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: