2801 - ccme.html - does it exist?

Unanswered Question
May 19th, 2008

As above, can I access the web config part by using the above address on my 2801? I try it but IE just says 'done' and displays a blank white screen.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Paolo Bevilacqua Mon, 10/11/2010 - 16:53

The one given above.

Or, you may be using the wrong version GUI files for the running IOS.

Charles Hill Mon, 10/11/2010 - 17:16

How do I verify if I have the wrong version?

Here is a debug from an attempted login.

Oct 11 17:10:40.979: its_urlhook url: /ccme.html, method 1
Oct 11 17:10:40.979: Mon, 11 Oct 2010 17:10:40 GMT /ccme.html auth_req
        Protocol = HTTP/1.1 Method = GET
Oct 11 17:10:40.979:
Oct 11 17:10:46.971: its_urlhook url: /ccme.html, method 1
Oct 11 17:10:46.983: HTTP: Priv level granted 15
Oct 11 17:10:46.983: Mon, 11 Oct 2010 17:10:46 GMT /ccme.html ok
        Protocol = HTTP/1.1 Method = GET
Oct 11 17:10:46.983:
Oct 11 17:10:46.987: telephony_service_server_get_action url:/ccme.html

Here is the IOS.


Paolo Bevilacqua Mon, 10/11/2010 - 17:17

You need to download the files specific for your version.

Anyway, the GUI is next to garbageware, so you're not loosing much.

Charles Hill Mon, 10/11/2010 - 17:19

Appreciate it.  I agree about the gui, however this is for lab purposes only.

mzsaad1234 Mon, 12/19/2011 - 11:22

Even though you won't be able to see ccme.html file on the flash but it would still work.

I had same issue. However I was able to fix it.

First, make sure you have the correct files extracted. Use this command:

archive tar /xtract tftp://xxx.xxx.xxx.xxx/file.tar flash:/

Secondly, make a note if you created a folder on flash and put the GUI files on there? If you did that, you will have modify ip http server command on the router.

I extracted the files to this folder on flash:


So I modified the ip http command to:

ip http path flash:CME8.6.0GUI

Then it should work.


This Discussion