3750 Etherchannel Load balancing

Unanswered Question

Our access switches consist of a 3 3750's in a stack. I created an etherchannel from the 3750 to a 6509, I used 1 fiber link from each of the 3750's to create a 3 port etherchannel. I also recently changed the port from a layer 2 connection to the 6509 to a L3 router port. Everything is working fine, then last weekend I tried changing the load balancing to src-dst-ip, and I had all sorts of connectivity problems. Some hosts worked fine, most didn't. What would be the cause of that? it works fine with the default source mac address load balancing.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
amritpatek Fri, 05/23/2008 - 06:05
User Badges:
  • Silver, 250 points or more

No, changing the Ether Channel configuration to src-dst-ip won't change the functionality of the channel.

As additional reference, the load balance non-IP packet the Catalyst will use the src-dst-mac load balancing

to distribute traffic among ether channel links when src-dest-ip is configured.

Actions

This Discussion