1242AG WGB and Client Devices

daniel.pimentel · ‎05-19-2008

Hi, is there a way to connect multiples AP to a root AP which is connected to the LAN and at the same time allowing client devices to connect to those AP. Perhaps, using 2.4 Ghz for client devices and 5 Ghz for WGB. Or perhaps using the AP as a repeater?

andrew.prince · ‎05-20-2008

Daniel,

The simple answer is yes - the only thing that could change the way they are configured is - are you AP's LWAPP or Autonomous

HTH.

daniel.pimentel · ‎05-26-2008

I'm using Autonomous AP, since there's no WLC.

Scott Fella · ‎05-26-2008

The only way is to setup the ap's as a repeater, which isn't a good idea, since the throughput is cut in half.

-Scott
*** Please rate helpful posts ***

andrew.prince · ‎05-27-2008

I agree with Scott, you a re probably best configuring the AP as a non-root or a work group bridge.