05-19-2008 02:12 PM - edited 07-03-2021 03:54 PM
Hi, is there a way to connect multiples AP to a root AP which is connected to the LAN and at the same time allowing client devices to connect to those AP. Perhaps, using 2.4 Ghz for client devices and 5 Ghz for WGB. Or perhaps using the AP as a repeater?
05-20-2008 12:44 AM
Daniel,
The simple answer is yes - the only thing that could change the way they are configured is - are you AP's LWAPP or Autonomous
HTH.
05-26-2008 01:09 PM
I'm using Autonomous AP, since there's no WLC.
05-26-2008 08:12 PM
The only way is to setup the ap's as a repeater, which isn't a good idea, since the throughput is cut in half.
05-27-2008 12:46 AM
I agree with Scott, you a re probably best configuring the AP as a non-root or a work group bridge.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide