Hello there, just new here and w/ cisco CCME version 4.0
My scenario is, we have a C3845 named PBX01 w/ CCME v 4.0 connected to PSTN and C3845 named PBX02 w/ 7911G ip phones connected (local numbers are 1...) to it.
I want to configure local number 1038 to receive an incoming call from PSTN 701102001. the IP phone local 1038 is connected to PBX02. What i did is configured the translation-rule from PBX01 to translate incoming 701102001 to 1038 and point it to PBX02. when i test it by calling from outside, the local 1038 is ringing but i can't hear a dtmf tone and when the phone is pick up the connection is cut or we can't hear each other. I already included a voice class codec configuration on my dial peers but it is still not working. Pls check my attached file w/ includes some of my config in PBX01 and PBX02.
Pls assist me if my configuration in Translation-rule, in voice class codec and dial peers are correct.