05-20-2008 02:38 AM - edited 03-03-2019 10:00 PM
HI,
Is it possible to apply any Qos on the Tunnel. How can we I improve the traffic in the MPLS tunnel.
05-20-2008 04:20 AM
hi,
it is possible to apply qos on tunnel interfaces
http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a008017405e.shtml
applying qos on mpls also possible.
rgds/shiva
05-21-2008 09:27 PM
Hi
In addition to the shiva's post do throw more on what you meant but MPLS tunnel...
are you planning to create an IPSEC or GRE tunnel on top of MPLS connection or you tried to mean the MPLS connectivity itself as MPLS tunnel.
if its a separate tunnel on top of MPLS link then you can refer the link posted ...
if its the MPLS link alone then you need to enter into an agreement with your SP to honour your markings and preserve the same till he delivers the same as an IP packet at the remote end.
regds
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide