i have 2600 router in that i want nm-hdv-e1 cord which will support 30 channels.so iam attaching my sh-version plz tell me this router will support or not.
cisco 2610 (MPC860) processor (revision 0x00) with 61440K/4096K bytes of
Processor board ID JAD06420MYZ (3030243644)
M860 processor: part number 0, mask 49
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102