Licence file; UCM upgrading

Unanswered Question
May 20th, 2008
User Badges:


Presently we running UCM 5.1.3.

We are planning to upgrade it to UCM 6.1.2.

We received the Device Unit License for UCM 6.1

My question is regarding the above License file, can this license file can be used on UCM 6.1.1 and UCM 6.1.2.

Due to no direct upgradation from 5.1.3 to 6.1.2 we are following the below procedure:

Firstly, We are upgrading UCM from 5.1.3 to 6.1.1 and switch over to 6.1.1 reboot and upload the above license

Secondly, we are upgrading UCM from 6.1.1 to 6.1.2 and switch over the versions and reboot the UCM(if necessary we upload the

above license file)

Please help me out

Thanks & Regards,

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Rob Huffman Tue, 05/20/2008 - 05:42
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Krishna,

Hope all is well :) This new License file will be fine for either 6.1(1) or 6.1(2) It should only need to be loaded after the 5.1(3) to 6.1(1) Step.

Hope this helps!



This Discussion