05-20-2008 06:43 AM - edited 07-03-2021 03:54 PM
Hi everyone,
my customer has an AIR-WLC4402-12-K9 using 12 access point with it, and they would like to increase the number of APs in use. Is there an upgrade option for 25? I couldn't find anything, but I suppose the hardware is the same, it's the software that differs.
If not, can they buy another AIR-WLC4402-12-K9 and connect it to the existing one? Can the software handle to controllers in the same wireless system?
Thanks in advane for all the input!
Peter
Solved! Go to Solution.
05-20-2008 07:00 AM
Peter,
Sadly the 44xx units are based on AP management - not a software. You could have another AIR-WLC4402-12-K9 and place the secondary in the same mobility group for seemless wireless networking....however if a WLC fails - you have lost the extra 12 AP capacity!
It would probably make sense to by a AIR-WLC4402-25-K9 or even a AIR-WLC4402-50-K9 for future expansion!
HTH.
05-20-2008 07:00 AM
Peter,
Sadly the 44xx units are based on AP management - not a software. You could have another AIR-WLC4402-12-K9 and place the secondary in the same mobility group for seemless wireless networking....however if a WLC fails - you have lost the extra 12 AP capacity!
It would probably make sense to by a AIR-WLC4402-25-K9 or even a AIR-WLC4402-50-K9 for future expansion!
HTH.
05-20-2008 07:03 AM
Hi Andrew,
thanks for the quick reply!
05-20-2008 07:07 AM
NP - glad to help.
09-13-2013 10:59 PM
Hi
How to upgrade the AIR-WLC4402-12-K9 to support more number of APs .
Could any one share the part code for the licnese.
Thanks & Regards
Lakshman Kumar S
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: