05-20-2008 08:17 AM - edited 03-18-2019 08:58 PM
When our CallManager 6.0 system is restarted, the phones register but display the incorrect time (i.e. they display Eastern Standard Time without the adjustment for Daylight Savings Time.
The time appears correct on the CallManager systems. I've read that these phones (IP 7941) may also get time information from the SRST.
Where else should I look?
Thanks.
05-20-2008 08:36 AM
Hi Michael,
I would look at the IP Phone firmware for the 7941's. You need a minimum of 8.2.2sr2 for the 3rd generation phones with DST. I think the latest and greatest is 8.3.5
Hope this helps!
Rob
05-20-2008 10:34 AM
Thanks, Rob.
At present I have firmware rev 8.3.1 on my 7941s, so that does not appear to be the issue. From what I am reading, the IP-phones obtain time information from two locations: the CM for "timezone" offset and the SRST for UTC.
My CM Date/Time group shows "Eastern Std/Daylight GMT-5" which is correct. I have NTP enabled.
I will continue to search, but if you (or anyone) has additional tips, it will be much appreciated.
Michael
07-10-2008 01:18 PM
I am also having the same problem. I noticed on the 6.0 CM that the options for Easter Standard time, both with and without daylight savings both show GMT -5. Currently with daylight savings, Eastern timezone should be -4. The 6.0 CM is bugged!
Does anyone know if there is a fix?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide