TACACS Command accounting

Answered Question
May 20th, 2008

HI

We configured accoutnig in our network devices.But the commands users are typing is not showing in TACACS+ Accounting section.We r using ACS 4.1se and commands for accounting in devices are given below.

aaa accounting exec default start-stop group tacacs+

aaa accounting commands 1 default start-stop group tacacs+

aaa accounting commands 15 default start-stop group tacacs+

Please help

I have this problem too.
0 votes
Correct Answer by Jagdeep Gambhir about 8 years 6 months ago

Command accounting logs are stored in tacacs administration logs. Also there is a known issue on ver 4.1.1 and we need to apply patch ACS 4.1.1.23.5 to fix the issue.

Patch for appliance is available on

http://www.cisco.com/cgi-bin/tablebuild.pl/acs-soleng-3des

Patch name : ACS SE 4.1.1.23.5 accumulative patch

Patch for acs windows is available on

http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-3des

Patch Name : ACS 4.1.1.23.5 accumulative patch

Regards,

~JG

Do rate helpful posts

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jagdeep Gambhir Tue, 05/20/2008 - 09:09

Command accounting logs are stored in tacacs administration logs. Also there is a known issue on ver 4.1.1 and we need to apply patch ACS 4.1.1.23.5 to fix the issue.

Patch for appliance is available on

http://www.cisco.com/cgi-bin/tablebuild.pl/acs-soleng-3des

Patch name : ACS SE 4.1.1.23.5 accumulative patch

Patch for acs windows is available on

http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-3des

Patch Name : ACS 4.1.1.23.5 accumulative patch

Regards,

~JG

Do rate helpful posts

Actions

This Discussion