FXS Secondary dial-tone

Unanswered Question
May 20th, 2008

Hi

In CME or CCM it's possible the secondary dial-tone in FXS interface?

The call it's fine and translate too, but don't have the secondary dial-tone.

Thanks

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Paolo Bevilacqua Tue, 05/20/2008 - 11:49

Supposedly if you configure the port in SCPP mode, at least for CME, you should have secondary dial-tone.

pgcristovam Tue, 05/20/2008 - 11:53

Hi Bevilacqua.

voice-port 0/0/0

cptone BR

timeouts interdigit 3

timeouts call-disconnect 0

timeouts wait-release 5

description ## RAMAL 1510 ##

dial-peer voice 1510 pots

description ## RAMAL 1510 ##

destination-pattern 1510

port 0/0/0

So, where I configure the voice-port like SCCP?

Thanks

Actions

This Discussion