Cisco VPN Client on Leopard 10.5.2

Unanswered Question
May 20th, 2008
User Badges:

I am running Cisco VPN client 4.9.01(0100) and am experiencing difficulties connecting to our Cisco 3000 concentrator. It seems that I can connect and authenticate no problem, and from the concentrator everything looks fine. Once authentication is complete however I have no connectivity either to the remote network or my local network. Pinging either the local gateway or the remote internal network nets me a "sendto: Network is unreachable" error. The client stays connected for about 5 minutes before being kicked off by the concentrator.

On my Tiger (10.4.x) laptop the client (4.7.x) works flawlessly using the same account information. Is anyone else experiencing this?

I have attached a log file. It shows that everything seems to hook up properly and then it suddenly stops getting any love.

Any help would be greatly appreciated!

Sean.





Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
dinesh.das Thu, 05/22/2008 - 01:18
User Badges:


Hi,

Verify your configuration on concentrator and Client whether you allowed the LOCAL LAN or not

sean.page Thu, 05/22/2008 - 06:22
User Badges:

The client is set to allow local LAN access, which has always worked in the past...

Actions

This Discussion