Hello
I have ACLs setup on my IOS switch in a specific manor that i need...i have CSM managing my IOS switches, and it always wants to deploy the changes below. But i do NOT want it to make these changes...where/how do i prevent this from happening?
TIA
This is the config change its trying to push and i DO NOT want it to do this:
ip access-list resequence voice-capture 11 10
ip access-list extended voice-capture
2 permit ip any any log
no permit ip any any dscp ef log
no permit ip any any dscp cs3 log
exit
!
ip access-list resequence test-list 11 10
ip access-list extended test-list
2 permit ip any any log
no permit ip any any dscp default log
exit
!