High memory used

3dtgnt_ljm · ‎05-20-2008

Hi , I have a ccm 5.1, before I restart it I can not open the website yesterday, and I find there is only 24M free memory left with 2G memory, but now I find it always has high memory used ,below is the infomation, who can tell me why ?it is ok ?

-------------------------------------

Host Name : ccm-1

Date : Wed May 21, 2008 07:58:15

Time Zone : Asia/Shanghai

Locale : en_US.UTF-8

Product Ver : 5.1.3.1000-12

Platform Ver : 2.0.0.1-1

Uptime:

07:58:16 up 13:44, 0 users, load average: 2.95, 2.43, 1.95

CPU Idle: 68.69% System: 04.04% User: 04.04%

IOWAIT: 23.23% IRQ: 00.00% Soft: 00.00% Intr/sec: 161.62

Memory Total: 2054284K

Free: 33360K

Used: 2020924K

Cached: 952020K

Shared: 0K

Buffers: 97208K

Total Free Used

Disk/active 12317912K 1082248K 11110520K (92%)

Disk/inactive 12317944K 11659388K 32828K (1%)

Disk/logging 125918364K 97444360K 22077728K (19%)

jsivulka · ‎05-26-2008

CCM is allowed up to 3GB and may use much of it in a high call, high device/line configuration. Nothing else on the server should be using large amounts of memory. Follow the URL for the configuration for the CCM :

http://www.cisco.com/en/US/docs/ios/12_3t/voice/command/reference/vrht_c4_ps5207_TSD_Products_Command_Reference_Chapter.html#wp1072619

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008017b1ee.shtml

paolo bevilacqua · ‎05-26-2008

Check with the TAC which patches (ES) applies to you system and apply them. Likely problem will go away.

3dtgnt_ljm · ‎06-01-2008

thanks for your reply , I had asked our vendor but they know nothing about the less memorys.