05-20-2008 11:51 PM - edited 03-10-2019 03:51 PM
Hi,
1. In ACS is it possible to give Readwrite access to an user when he logs in to a Network device group and readonly access when he logs in another network device group.
Thanks in advance
Solved! Go to Solution.
05-21-2008 06:00 PM
Hi,
You need to set up Command Authorization Set on a per Network Device Group Basis
Assign a Shell Command Authorization Set on a per Network Device Group Basis-Associates particular shell command-authorization sets to be effective on particular NDGs.
Regards,
~JG
05-21-2008 08:13 AM
In the access restrictions section located in group setup tab, for the specific user-group, you would be able to set the permission. There will be a section enable options wherein you can specify permission for each each device or each network device group.
05-21-2008 06:00 PM
Hi,
You need to set up Command Authorization Set on a per Network Device Group Basis
Assign a Shell Command Authorization Set on a per Network Device Group Basis-Associates particular shell command-authorization sets to be effective on particular NDGs.
Regards,
~JG
05-22-2008 04:22 AM
Hi all,
We have successfully configured the User level access to different network device groups. this was accomplished by configuring different network device and Shell command authorization set.
Thanks for all your help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide