05-22-2008 10:15 AM - edited 03-11-2019 05:48 AM
So I have a L2L vpn tunnel up between a PIX 506E and a PIX 515E
When i try to load https://pix-506E from user connected to PIX-515E i can't access to it.
I believe i need to apply an ACL to PIX-506E to allow PIX-515E on port 8080.
Can you pleae help me with the config?
PIX-506E
inside 172.25.1.1
outside x.x.x.x
PIX-515E
inside 172.16.1.1
outside g.g.g.g
05-22-2008 10:56 AM
I figured it out.
I have to enable hhtp on the pix
http 172.16.1.0 255.255.255.0
05-22-2008 10:58 AM
Ezequiel,
You can change the port number by:-
http server enable xx
xx=new port number.
To allow remote access
http x.x.x.x y.y.y.y <
x.x.x.x = ip subnet
y.y.y.y = subnet mask
so something like
http 172.16.1.0 255.255.255.0 inside
HTH.
05-22-2008 10:59 AM
only in ver 7x/8x can you change the port number.
05-22-2008 11:02 AM
Thank you for the info.
One more thing, looks like it opens PDM
but is been 5 minutes and says
LOADING PIX DEVICE MANAGER. PLEASE MAIT with an hour glass.
Any clues?
05-22-2008 11:15 AM
bahh Java version.
Downgraded, got it open.
Thank you,
Zeek
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide