cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
736
Views
9
Helpful
7
Replies

How i can upgrade my asa to 8.0?

I have asa 5520 with software ver 7.2 & vpn+ licens

How i can upgrade to 8.0?

I think if i download new soft from cisco.com then download them to asa flash & reload with this new image - then all it's ok, but what about license?

How i can incert my licens to new software?

7 Replies 7

vitripat
Level 7
Level 7

You just need to download 8.x image, copy to flash, set ASA to boot from the new image and reload the ASA.

copy tftp flash (to copy image from tftp server)

no boot system

boot system

Need not worry about license, it will remain same.

Hope that helps.

Regards,

Vibhor.

Ok thx, but then what about config?

all command will work with new image or not?

All commands from ASA 7.2 will work fine in 8.0 version.

the change in command format from 7.x to 8.x is automatically done during the upgrade.also,the new default fatures in 8.x are also added.also,please be aware that as 8.x is a bigger image with many more features,the memory consumption of your f/w would increase to a considerable amount.this is normal for any upgrade to 8.x.

Regards,

Sushil

THX

Can you be more explicit about the license please? Is the upgrade to 8.0x free of charge?

Is it valid also for PIX family, like from 6.3(5) to 8.0(3)?

Thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: