no busy tone and no Announcement Messages from pstn/gsm gateway

Unanswered Question
May 22nd, 2008
User Badges:

make an outbond call from sccp ip phone to pstn/gsm phone using SIP gateway (cisco 2800) no busy tone and Announcement Messages received, Continuously bell are ringing please help

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
rhobab Wed, 11/19/2008 - 05:05
User Badges:

Hi there


I have the same issue and the cimmand you suggest does not solve the problem.


Thanks


Victor

Yorick Petey Sun, 01/11/2009 - 08:49
User Badges:

Hi Victor,


I have the same issue. Even with this commad, the call is still ringing and I don't receive the announcement from the operator in case of wrong number.


Did you solve this issue?

Thank you.


Yorick

rhobab Mon, 01/12/2009 - 04:41
User Badges:

Hi


Try the command "voice call convert-discpi-to-prog" in global configuration as stated by an earlier reply. At first I was not putting the command right but now it is ok.


Victor

Yorick Petey Mon, 01/12/2009 - 04:50
User Badges:

Hi Victor,


I tried this command but I cannot see any difference with or without it.

Which IOS version do you use? I tried with 12.4(9)T7 and 12.4(15)T8.


Thank you.


Yorick Petey

Yorick Petey Mon, 01/12/2009 - 10:34
User Badges:

Victor,


Can you send me your running-config?

It's strange, I am using 12.4(15)T8 which is only a Maintenance release, so it should work.


What is your CUCM version? I am using the new 6.1.3.


Thank you very much.


Yorick

Yorick Petey Mon, 01/12/2009 - 10:56
User Badges:

Hi java,


This command is already here. Please find attached my current configuration.

(removed some infos for privacy)


Yorick

Actions

This Discussion