Anonymous (not verified) Thu, 05/29/2008 - 08:54
User Badges:

enable the UDP 4500 & 500 ports as well as esp ports. You will have to get NAT-T enabled on the Checkpoint VPN client as well as Checkpoint firewall. If one of these devices doesn't support NAT-T then there cannot be a connection established

jgaskin01 Thu, 05/29/2008 - 09:02
User Badges:

Thank you for the responses.

I have configured the RADIUS on the server like we have setup on the other servers so this should be set.


This Discussion