LAP remote access

Unanswered Question
May 23rd, 2008
User Badges:

Hi,


We have now couple of times had a situation when some LAPs have lost the connection to the WLC. Only way to got LAPs back to live has been hard reset (mode button + power off). I have all the time been able to ping LAPs on hanging situations.


Have anyone else had this kind of behavior (code 4.2.99.0)? Is there anyway to take SSH connection to the LAP and give the hard reset command remotely?



B.R.

Teemu

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
jeromehenry_2 Fri, 05/23/2008 - 02:22
User Badges:
  • Silver, 250 points or more

Which model do you use?

Most LAPs can't be telneted to, but console works.

I use PoE switches, so shut/no shut solves the issue. Still, there is no reason why a LAP would lose connection...

tvaris Fri, 05/23/2008 - 02:34
User Badges:

Hi,


We are using C1131AG LAPs and WLC4404.


But in cases when power off/on doesn't help and you must use mode button, it would be helpful if you can give same command remotely.


B.R.

Teemu

Scott Fella Sat, 05/24/2008 - 19:42
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

How is everything setup.... doesn't seem right for some reason.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode