cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
725
Views
0
Helpful
1
Replies

Static Virtual Tunnels Interfaces (SVTI)

karen_mcalister
Level 1
Level 1

Hi, I need some help in guiding me in how to apply SVTI for 60+ tunnels over a single interface. (i.e source and destination are the same for all tunnels s = 10.0.0.1 and dest = 10.0.0.2. When I try to create more than one tunnel, the first tunnel goes down.

1 Reply 1

andrew.prince
Level 10
Level 10

Karen,

Yep - you have hit the first show stopper with multiple tunnels using the same IP scheme!

I have 115 tunnels from my D/C's going to remote sites - no issues, as I have allocated specific IP address ranges.

My tunnels have specific /30 addresses out of a /24 range. I use loopback's for source & destination's for the tunnels - the loopbacks are part of their own /24 with 255.255.255.255 subnet masks.

To be honest if you have planned your IP subnet structure correctly - you should have no issues giving your 60+ tunnels unique ip addresses.

HTH.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: