let me take that one step further. You can use a trunk or access ports for AP connectivity. The LWAPP tunnel will cross over either. I have deployed these over a MPLS network over switch port.

whatv vlans we should allow in trunk port ?

in my scenario, we have MPLS network in between.

Pls. explain if possible. Thanks !

For an H-REAP AP, you need to trunk only the vlan your ap management ip address is on and any of your vlans you wish to put wireless users on (local switching). If you are centrally switching any SSID's, you do not need to add those vlans to the trunk port.

Sent from Cisco Technical Support iPhone App