05-23-2008 08:49 AM
Help, we have a 4507 and the 5 vty lines are full of idle sessions....
We could open up more lines but I want to just kill off these idle sessions as they are have no timeout. The only way we can get in at the moment is via the console.
Can anyone please advise? i've tried the command disconnect line etc i've also now added an idle timeout of 60 mins but this has had no effect on these open sessions.
Thank in advance
Solved! Go to Solution.
05-23-2008 08:56 AM
Try clear line X. For example:
Switch#show line
Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int
0 CTY - - - - - 0 0 0/0 -
* 1 VTY - - - - - 788 0 0/0 -
* 2 VTY - - - - - 117 0 0/0 -
3 VTY - - - - - 36 0 0/0 -
4 VTY - - - - - 19 0 0/0 -
5 VTY - - - - - 0 0 0/0 -
Switch#clear line 2
[confirm]
[OK]
That should free up the other VTYs.
05-23-2008 08:56 AM
Try clear line X. For example:
Switch#show line
Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int
0 CTY - - - - - 0 0 0/0 -
* 1 VTY - - - - - 788 0 0/0 -
* 2 VTY - - - - - 117 0 0/0 -
3 VTY - - - - - 36 0 0/0 -
4 VTY - - - - - 19 0 0/0 -
5 VTY - - - - - 0 0 0/0 -
Switch#clear line 2
[confirm]
[OK]
That should free up the other VTYs.
05-24-2008 01:12 AM
thanks for the quick reply, i'll try and let you know
05-28-2008 11:56 AM
thanks this resolved the issue
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: