Unanswered Question
May 24th, 2008
User Badges:


Did any one face the above error when configuring the PRI.

AEDICR08(config-controller)#pri-group timeslots 1-31

% Not enough DSP resources available to configure pri-group on controller E1 0/0


% The remaining dsp resources are enough for 0 time slots.

% For current codec complexity, 2 extra dsp(s) are required to create this voice


Also i am not able to configure the card type. My router type is 2800.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
paolo bevilacqua Sat, 05/24/2008 - 04:58
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

The vwic card that you're using is meant for voice mainly and need DSP resource when configuring PRI. Are you configuring the router for voice applications ?

Card type is needed only when you have vwic2, you have vwic.


This Discussion