05-25-2008 04:26 AM - edited 02-21-2020 02:02 AM
I have configured ASA for Cisco Anyconnect SSL Client and Cisco Secure Desktop. When the user does SSH a new window or applet appears and i am able to do ssh properly.
the applet or window size where ssh is appearing, is very small. i need to increase the size of applet window. How can i do that.
05-30-2008 10:59 AM
You can refer to this guide for more information on confiuging web vpn:
06-01-2008 01:13 AM
Dear smalkeric,
the ssl vpn is working fine but after that i need to ssh a server which i am doing through the web VPN screen. the problem is the applet window size is small i need to enlarge it
06-06-2008 06:15 AM
There might be a solution to your problem, but don't do this on a production ASA :). Also this might be a configuration not supported by Cisco TAC.
There is a file in the ssh-plugin.jar root called "conf.conf". Open the jar with winrar and edit this file to add these two lines:
Applet.disconnect = false (Already there)
Applet.detach = true
Applet.detach.fullscreen = true
But please be careful with this :)
Regards
Farrukh
06-06-2008 06:42 AM
Also you could try one more thing:
In the following location you will find a 'jta.html' file,
disk0:/csco_config/97/plugin/ssh
There you could try to edit the following line:
< applet id=tty codebase=\".\" archive=jta26.jar code=de.mud.jta.Applet width=590 height=360> < param name=Socket.host value=" + server + "> < param name=Socket.port value=" + port + ">
And change the height and width parameters to something larger:
width=590 height=360
Regards
Farrukh
11-06-2009 07:10 AM
I was able to increase the telnet window size to 1024x768. The window is now perfect. Thanks for this post.
11-06-2009 09:31 AM
I'm glad I could help.
First solution worked or the second one? :)
Regards
Farrukh
11-06-2009 09:49 AM
I did this one....
[QUOTE]
Also you could try one more thing:
In the following location you will find a 'jta.html' file,
disk0:/csco_config/97/plugin/ssh
There you could try to edit the following line:
< applet id=tty codebase=\".\" archive=jta26.jar code=de.mud.jta.Applet width=590 height=360> < param name=Socket.host value=" + server + "> < param name=Socket.port value=" + port + ">
And change the height and width parameters to something larger:
width=590 height=360
Regards
Farrukh
[/QUOTE]
Thanks again.
09-01-2010 07:54 AM
How do i get to dis folder?
disk0:/csco_config/97/plugin/ssh
I cannot find it in File Managment
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide