Dear smalkeric,

the ssl vpn is working fine but after that i need to ssh a server which i am doing through the web VPN screen. the problem is the applet window size is small i need to enlarge it

There might be a solution to your problem, but don't do this on a production ASA :). Also this might be a configuration not supported by Cisco TAC.

There is a file in the ssh-plugin.jar root called "conf.conf". Open the jar with winrar and edit this file to add these two lines:

Applet.disconnect = false (Already there)

Applet.detach = true

Applet.detach.fullscreen = true

But please be careful with this :)

Regards

Farrukh

Also you could try one more thing:

In the following location you will find a 'jta.html' file,

disk0:/csco_config/97/plugin/ssh

There you could try to edit the following line:

< applet id=tty codebase=\".\" archive=jta26.jar code=de.mud.jta.Applet width=590 height=360> < param name=Socket.host value=" + server + "> < param name=Socket.port value=" + port + ">

And change the height and width parameters to something larger:

width=590 height=360

Regards

Farrukh

I was able to increase the telnet window size to 1024x768. The window is now perfect. Thanks for this post.

I'm glad I could help.

First solution worked or the second one? :)

Regards

Farrukh

I did this one....

[QUOTE]

Also you could try one more thing:

In the following location you will find a 'jta.html' file,

disk0:/csco_config/97/plugin/ssh

There you could try to edit the following line:

< applet id=tty codebase=\".\" archive=jta26.jar code=de.mud.jta.Applet width=590 height=360> < param name=Socket.host value=" + server + "> < param name=Socket.port value=" + port + ">

And change the height and width parameters to something larger:

width=590 height=360

Regards

Farrukh

[/QUOTE]

Thanks again.

How do i get to dis folder?

disk0:/csco_config/97/plugin/ssh

I cannot find it in File Managment