05-25-2008 04:26 AM - edited 02-21-2020 02:02 AM
I have configured ASA for Cisco Anyconnect SSL Client and Cisco Secure Desktop. When the user does SSH a new window or applet appears and i am able to do ssh properly.
the applet or window size where ssh is appearing, is very small. i need to increase the size of applet window. How can i do that.
05-30-2008 10:59 AM
You can refer to this guide for more information on confiuging web vpn:
06-01-2008 01:13 AM
Dear smalkeric,
the ssl vpn is working fine but after that i need to ssh a server which i am doing through the web VPN screen. the problem is the applet window size is small i need to enlarge it
06-06-2008 06:15 AM
There might be a solution to your problem, but don't do this on a production ASA :). Also this might be a configuration not supported by Cisco TAC.
There is a file in the ssh-plugin.jar root called "conf.conf". Open the jar with winrar and edit this file to add these two lines:
Applet.disconnect = false (Already there)
Applet.detach = true
Applet.detach.fullscreen = true
But please be careful with this :)
Regards
Farrukh
06-06-2008 06:42 AM
Also you could try one more thing:
In the following location you will find a 'jta.html' file,
disk0:/csco_config/97/plugin/ssh
There you could try to edit the following line:
< applet id=tty codebase=\".\" archive=jta26.jar code=de.mud.jta.Applet width=590 height=360> < param name=Socket.host value=" + server + "> < param name=Socket.port value=" + port + ">
And change the height and width parameters to something larger:
width=590 height=360
Regards
Farrukh
11-06-2009 07:10 AM
I was able to increase the telnet window size to 1024x768. The window is now perfect. Thanks for this post.
11-06-2009 09:31 AM
I'm glad I could help.
First solution worked or the second one? :)
Regards
Farrukh
11-06-2009 09:49 AM
I did this one....
[QUOTE]
Also you could try one more thing:
In the following location you will find a 'jta.html' file,
disk0:/csco_config/97/plugin/ssh
There you could try to edit the following line:
< applet id=tty codebase=\".\" archive=jta26.jar code=de.mud.jta.Applet width=590 height=360> < param name=Socket.host value=" + server + "> < param name=Socket.port value=" + port + ">
And change the height and width parameters to something larger:
width=590 height=360
Regards
Farrukh
[/QUOTE]
Thanks again.
09-01-2010 07:54 AM
How do i get to dis folder?
disk0:/csco_config/97/plugin/ssh
I cannot find it in File Managment
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: