Cisco 1811w

Unanswered Question
May 25th, 2008

I would like to know if there is something I can do to allow wireless traffic to the local LAN.

My config is attached. i have Vlans 1-5, 1&2 are for the lan, 3-5 are for wireless. I cannot access resources on the LAN with either.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
tu_amor66 Mon, 05/26/2008 - 10:48

I apologize, I have since changed my config,hoping to correct the issue. I removed the bridging that was associated with it, but I still have the same issue.

tu_amor66 Mon, 05/26/2008 - 10:56

Disregard,I figured it out.

I removed the deny ip any

I do appreciate the help.

access-list 111 permit ip host

access-list 111 permit ip any

access-list 111 permit ip any

access-list 111 permit udp any any eq bootpc

access-list 111 permit udp any any eq bootps

access-list 111 deny ip any any

tu_amor66 Tue, 05/27/2008 - 10:01

No, the wireless is still configured, I just removed the bridging, and the network performs great. The appropiate Vlans are segmented and protected, Thanks for you help .


This Discussion