05-25-2008 09:38 PM - edited 03-03-2019 10:05 PM
Dear seniors,
We are not able to access the Router (7206VXR) on today day before yesterday we were work on that we were accessing the router through putty because telnet is disable on router and Network Error Connection Refused. This error we are getting while accessing the router remotelyâ¦so what could be the problem how I can resolve this issue
Solved! Go to Solution.
05-25-2008 11:49 PM
HI Sasi,
As discussed, since the VTY Session are not timed-out configure the VTY Line as below:
line vty 0 4
"exec-timeout 3 0"
The Exec-timeout will help to clear the Lines after certain period of time.
Best Regards,
Guru Prasad R
05-25-2008 09:47 PM
HI Sasikumar, [Pls Rate if HELPS]
In the Configuartion under "Line VTY" have you done any changes like "transport input none" command
because this command will not allow anyone to login via the VTY Sessions by preventing the Telnet Access on Port 23. Try login via Console and remove such commands if any.
Is the services of the Router are working fine ?
Hope i am informative.
Pls Rate if HELPS
Best Regards,
Guru Prasad R
05-25-2008 10:18 PM
we didn't change any thing on router previos we were logging throug putty only now we not able to access
05-25-2008 10:20 PM
we are using login that router through SSH
05-25-2008 11:16 PM
HI Sasikumar,
Are you able to login via Console and check any un-usual logs regards to authentication via VTY ?
Regards,
Guru Prasad R
05-25-2008 11:32 PM
yes we access the router through console and we cleared the lines VTY because login 15 was there now we solved this issue
05-25-2008 11:25 PM
Hi
U need to use a terminal software which supports SSH try secreCRT.
Thanks
Mahmood
05-25-2008 11:27 PM
yes we are using putty s/w
05-25-2008 11:35 PM
HI Sasikumar,
Can you paste the line VTY Config and AAA Configuration ?
Regards,
Guru Prasad R
05-25-2008 11:49 PM
HI Sasi,
As discussed, since the VTY Session are not timed-out configure the VTY Line as below:
line vty 0 4
"exec-timeout 3 0"
The Exec-timeout will help to clear the Lines after certain period of time.
Best Regards,
Guru Prasad R
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: